Mil-Spec
Showing 61–72 of 461 resultsSorted by popularity
-
This MIL-L-23398 specification establishes the requirements for two types of air-cured solid film lubricant (identified by NATO code number S-749) intended to reduce wear and prevent seizing, corrosion and galling, the lubricant can be applied by dipping, brushing or spraying.
-
The MIL-DTL-53030 covers the requirements for a water based, air-drying, corrosion-inhibiting, epoxy type primer for pretreated ferrous and nonferrous metals. The primer is lead and chromate free and is compatible with chemical agent resistant aliphatic polyurethane topcoats. The primer contains no more than 2.8 pounds/gallon (lbs/gal) (340 grams/liter (g/l) of volatile organic compounds (VOC) and is hazardous air pollutants-free (HAP-free), as applied.
-
This MIL-L-46150 specification covers one grade of semi-fliud lubricant which provides a low coefficient of friction and high load-carrying capacity.
-
This TT-E-489 specification covers one type of an air drying, high gloss, alkyd enamel for use on primed exterior and interior metal and wood surfaces.
-
This MIL-PRF-8116 specification covers a general purpose putty compound with corrosion inhibitors.
-
The MIL-I-3064 specification covers the electrical and physical requirements of the plastic-sealer compound used for sealing electrical cable penetrations, end sealing cables, and fire stop applications requiring good electrical insulation and heat resistant properties.
-
This description covers a durable, pigmented, high gloss lacquer for spray or hand application on primed or prepared surfaces.
-
This MIL-C-10578 specification covers five types of concentrated phosphoric acid rust removing and metal conditioning compound which, when diluted with water and applied to metal surfaces, will remove rust from ferrous metal surfaces and provide a slight etching action for ferrous and nonferrous metals to promote the adhesion of paint or corrosion preventives. Get a free quote on this phosphoric acid cleaner for metal today.
-
This MIL-PRF-8516 specification covers a two-component, chemically cured synthetic rubber compound for insulating, sealing, reinforcing, and corrosion protection of electric connectors, wiring, and other electric apparatus. This specification has provisions for shelf-life extension (see 3.2.4).
-
MIL-PRF-85582 Epoxy Primer is a two-component chemically cured waterborne primer that forms a film that is resistant to chemicals, solvents, moisture, and abrasion. This product has excellent adhesion to most substrates and is recommended for use as a primer under aliphatic polyurethane topcoats in aerospace applications.
-
This specification is canceled. Superseded by A-A-59137.
-
This MIL-PRF-32033 specification covers one type and grade of water-displacing, preservative lubricating oil, known hereinafter as “oil”, for general purpose applications at low temperatures. The oil can be applied by dipping, brushing, or by spraying from gas-pressurized cans. The oil is identified by Military Symbol PL-S and NATO Code Number O-190.