Corrosion Preventatives
Corrosion Preventatives
Showing all 9 results
-
A-A-59295 Corrosion Preventive Compounds, Cold Application (For New And Fielded Motor Vehicles And Trailers)
This CID covers solvent dispersed corrosion preventive compound referred to herein as “compound” for spray, brush, or dip application on new and fielded motor vehicles and trailers.
-
MIL-C-11796 Corrosion Preventive Compound, Petrolatum, Hot Application
This specification covers a suitably formulated petrolatum-base corrosion preventive compound.
-
MIL-C-23441 Corrosion Preventive Compounds, Clear
This specification is canceled. Superseded by MIL-C-81309
-
MIL-C-6529 Corrosion Preventive, Aircraft Engine
This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.
-
MIL-DTL-85054 Corrosion Preventive Compound, Water-Displacing, Transparent (Formerly AMLGUARD)
This specification covers a transparent, water-displacing, corrosion preventive compound, available in high and low volatile organic compound (VOC) types, which may be applied by brushing or spraying (see 6.1).
-
MIL-PRF-16173 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
The MIL-PRF-16173 performance specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.
-
MIL-PRF-24453 Inhibitor, Corrosion, Soluble Oil
This specification covers a petroleum base oil soluble corrosion/rust inhibitor coating compound with such additives as necessary to minimize rust formation and corrosion in water systems.
-
MIL-PRF-81309 Corrosion Preventive Compounds, Water Displacing, Ultra-Thin Film
This specification covers the requirements for two types and two classes containing two grades of ultra-thin film, water displacing, corrosion preventive compounds which may be applied by dipping, spraying, brushing or by spraying from self-pressurized containers.
-
MIL-PRF-8188 Corrosion-Preventative, Aircraft Turbine Engine, Synthetic Base
This specification covers the requirements for one type of corrosion-preventive oil for preservation of engines which normally operate on synthetic base oils. This oil is identified by NATO Code Number C-638.
