Varnishes
Varnishes
Showing all 19 results
-
A-A-1546 Rubbing Varnish
The rubbing varnish shall be a high gloss, clear, air-drying, oleoresinous varnish suitable for brushing or interior wood and metal furniture where a rubbed finish is desired.
-
A-A-1632 Varnish, Asphalt
This description covers an ashpalt varnish for utility purposes.
-
A-A-1788 Varnish, Oil: Interior
This commercial item description describes a clear, satin or gloss, air-drying, interior, alkyd or modified alkyd varnish. It is suitable for brushing as is and spraying.
-
A-A-1800 Varnish, Oil: Spar
This specification is for a varnish, oil: spar.
-
DOD-V-15218 Varnish (Mixing, Phenolic)
This specification covers two phenolic mixing varnishes for use in mixing with alkyd resin in the preparation of paint. Both varnishes are 25 gallons in oil length (i.e., for every 100 pounds of resin, 25 gallons of oil are used).
-
MIL-DTL-12276 Varnish, Phenolic, Baking
This specification covers three types of heat hardening phenolic varnishes suitable for use as a coating for cartridge cases and as a lining for munitions and other containers. This document also provides for an additional composition suitable for use under Air Pollution regulations.
-
MIL-V-1174 Varnish, Spar, Water Resisting (Formula No 80)
This specification is canceled. Use TT-V-119.
-
MIL-V-13750 Varnish, Phenol-Formaldehyde, Clear And Aluminum Pigmented
This specification covers two grades and four types of clear and aluminum pigmented para-phenyl phenol-formaldehyde resin air driving varnishes for use on ammunition.
-
MIL-V-13811 Varnish, Waterproofing, Electrical, Ignition
This specification covers one grade of clear (unpigmented) varnish for use in protecting electrical circuits and engine parts of internal combustion engine.
-
MIL-V-16399 Varnish, Moistureproof
This specification covers a moistureproof varnish having a tung oil and phenolic resin base.
-
MIL-V-173 Varnish, Moisture-and-Fungus Resistant (for Treatment of Communications, Electronic, and Associated Equipment)
This specification covers one type of moisture-and-fungus-resistant varnish consisting of a para-phenyl phenol-formaldehyde resin in combination with tung oil and suitable solvents which has been made fungistatic by the addition of 7.0 +/- 1.0 percent salicylanilide or one percent copper b-quinolinolate, for the treatment of assembled communications, electronic, and associated electrical equipment.
-
MIL-V-21064 Varnish, Finishing, Baking for Roller Coat Application
This specification covers two classes of finishing varnish for roller coat application on sheet metal which has been sized and color coated. This specification meets Air Pollution Regulations (Rule 66).
-
MIL-V-6093 Varnish, Decalcomania Adhesive
This specification is canceled. Superseded by TT-V-109
-
MIL-V-6894 Varnish, Oil Type, Gloss Finish, Glyceryl Phthalate Base
This specification is canceled. Use TT-V-109.
-
TT-V-109 Varnish, Interior, Alkyd-Resin
Varnish covered by this specification is a clear, air-drying varnish of the alkyd-resin type for interior use.
-
TT-V-119 Varnish, Spar, Phenolic-Resin
This varnish covered by this specification is a clear, air-drying spar varnish of the phenolic-resin type. Superseded by A-A-1800.
-
TT-V-121 Varnish, Spar, Water-Resisting
This specification covers one grade of clear, air-drying spar varnish of the oleoresinous type. Superseded by A-A-1800.
-
TT-V-51 Varnish: Asphalt
This specification covers an asphalt varnish type, suitable for general use. This specification is canceled. Superseded by A-A-1632.
-
TT-V-71 Varnish, Interior, Floor And Trim
This specification covers an oleoresinous varnish intended for general interior use. This specification is canceled. Superseded by A-A-1788.