Mil-Spec
Showing 49–60 of 461 resultsSorted by popularity
-
The VV-P-236 Petrolatum covers one grade of petrolatum for use as a light lubricating grease.
-
This specification covers acetone (99.5 percent grade). The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed valve or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.
-
This specification covers four types of semigloss rust-inhibiting enamel for use on metal as a one or two coat primer or finishing system.
-
This A-A-59166 commercial slip resistant paint is used for walkways on exterior aircraft surfaces.
-
This MIL-V-173 specification covers one type of moisture-and-fungus-resistant varnish consisting of a para-phenyl phenol-formaldehyde resin in combination with tung oil and suitable solvents which has been made fungistatic by the addition of 7.0 +/- 1.0 percent salicylanilide or one percent copper b-quinolinolate, for the treatment of assembled communications, electronic, and associated electrical equipment.
-
This commercial stencil ink item description covers four types of opaque ink for marking on porous and non-porous surfaces.
-
This MIL-C-6529 specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.
-
This MIL-PRF-81309 specification covers the requirements for two types and two classes containing two grades of ultra-thin film, water displacing, corrosion preventive compounds which may be applied by dipping, spraying, brushing or by spraying from self-pressurized containers.
-
This VV-L-800 specification covers one type and grade of water-displacing, preservative lubricating oil for general purpose applications at low temperatures. This specification is canceled. Superseded by MIL-PRF-32033.
-
This MIL-S-11030 specification covers single-component black, inert, thermoplastic, mastic, non-curing sealants. These sealing compounds are not to be used as an integral fuel tank or pressure cabin standards. The service temperature of the sealing compounds are -400c to 820c [-400 to 1800F).
-
This TT-T-291 specification covers three types of mineral spirits (volatile petroleum spirits) for thinning paints, enamels, varnishes, and related materials. This specification is canceled. Superseded by A-A-2904.
-
This MIL-C-43616 specification covers the requirement for two classes of aircraft surface cleaning compounds. This specification is canceled. Superseded by A-A-59921.