Paints
Paints
Showing 1–48 of 50 results
-
A-A-2246 Paint, Latex
This description covers 5 types of glass latex paint for interior use as follows: Type I – High hiding white suitable for tinting to pastel shades Type II – Ready mixed colors Type III – Medium shade tint base Type IV – Deep tone tint base Type V – Ultra deep tone tint base.
-
A-A-2886 Paint, Traffic, Solvent Based
This Commercial Item Description covers a solvent based traffic paint suitable for application to traffic bearing surfaces such as Portland cement, concrete, bituminous pavement, and plain or vitrified brick surfaces of streets, highways, bridges, tunnels, runways and parking lots.
-
A-A-3054 Paint: Heat Resisting (204 Deg. C)
This commercial item description describes a one component, heat resisting paint. This paint is for use over metal, primarily steel, and can withstand continuous operating temperatures of 204 Deg. C (400 Deg. F).
-
A-A-3058 Paint, Interior, Fire Retardant
This commercial item description describes an interior, waterborne, Uniform Building Code (UBC) Class 1, fire retardant paint. This paint can be applied by brush, spray, or roller.
-
A-A-3121 Paint, Rubber-Base: for Interior Use (Concrete and Masonry Floors)
This commercial item description (CID) describes a ready-mixed, synthetic rubber-base paint for interior concrete and masonry floors.
-
A-A-3183 Paint, Latex, Exterior, (for Wood and Masonry)
This commercial item description covers a acrylic latex paint for exterior use on primed concrete, masonry, stucco, and wood. It shall conform to the requirements of prohibited materials.
-
MIL-DTL-24441 Paint, Epoxy-Polyamide, General Specification for
This specification covers a series of two component epoxy-polyamide paints designed to protect surfaces from environmental attack.
-
MIL-P-14105 Paint, Heat-Resisting (for Steel Surfaces)
This specification covers a heat-resisting, ambient dry/heat cure paint that will withstand temperatures to a maximum of 1,400
-
MIL-P-15123 Paint, Boot-Topping, Black (For Wooden Vessels) Formula No 3
This specification is canceled. Use MIL-E-698.
-
MIL-P-15144 Paint, Formula No 34 (Binder for Anti-Sweat Coatings)
This specification covers paint, Formula No. 34, for use with expanded vermiculite or ground cork, to provide anti-sweat protection on piping and bulkheads.
-
MIL-P-15149 Paint, Stencil
This specification is canceled. Use TT-P-98.
-
MIL-P-21035 Paint High Zinc Dust Content, Galvanizing Repair
This specification covers a high zinc dust content paint for regalvanizing welds in galvanized steels.
-
MIL-P-47115 Paint, Epoxy, Abrasion, Heat and Corrosion Resistant
-
MIL-P-4812 Paint, Bullet Tipping
-
MIL-P-6884 Paint, Camouflage Or Temporary Identification, Solvent Removable
This specification covers the requirements for a temporary paint for camouflage or identification purposes, capable of being removed after an extended weathering period with aliphatic solvents.
-
MIL-PRF-85285 Coating, Polyurethane, Aircraft And Support Equipment
MIL-PRF-85285 Polyurethane Coating is an aerospace grade, multi-component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion. This coating has excellent adhesion to most substrates and is recommended for heavy duty industrial applications where a tough, resilient finish is required.
-
TT-N-96 Paint, Latex Base, For Wxterior Surfaces (Whites and Tints)
This specification is canceled. Superceded by TT-P-19
-
TT-P-102 Paint, Oil, (Alkyd Modified, Exterior, Low VOC)
This specification covers long-oil alkyd paints designed for general exterior use on new or previously painted wood trim, siding, primed metal, and sealed concrete. They are lead and chromate free and have a low volatile organic compound (VOC) content. This specification is canceled. Superseded by A-A-3067.
-
TT-P-110 Paint, Traffic Black (Nonreflectorized)
This specification covers black, nonreflectorized traffic paint for marking of and obliterating markings on runways and highways. This specification is canceled. Superseded by TT-P-1952 or A-A-2886.
-
TT-P-115 Paint, Traffic, Highway, White and Yellow
This specification covers paint suitable for application to traffic bearing surfaces such as ortland cement, concrete, bituminouspavement, and plain or vitrified brick surfaces of streets, highways, bridges, tunnels, and parking lots.
-
TT-P-1411 Paint, Copolymer-Resin, Cementitious (For Waterproofing Concrete and Masonry Walls)
This specification covers a cementitious waterproofing coating for concrete and masonry walls.
-
TT-P-1510 Paint, Latex, Exterior, For Wood Surfaces, White and Tints
This specification covers an alkyd modified latex paint for use as a finish coat on properly primed or previously coated exterior wood surfaces.
-
TT-P-1511 Paint, Latex (Gloss and Semigloss, Tints and White) (For Interior Use)
This specification covers latex-base paints for interior use on walls and ceilings. Superseded by TT-P-29.
-
TT-P-1565 Paint, Boot-Topping Black
This specification covers black boot-topping paint for wooden vessels. The paint is also satisfactory for use on steel.
-
TT-P-19 Paint, Latex (Acrylic Emulsion, Exterior Wood and Masonry)
This specification covers two types of low VOC, ready-mixed, one component, 100 % acrylic waterborne airfield and traffic marking paint. The paint is suitable for application on such traffic-bearing surfaces as Portland cement concrete, bituminous cement concrete, asphalt, tar and previously painted areas of these surfaces. The paint may be used either alone or to bind reflective beads.
-
TT-P-1952 Paint, Traffic and Airfield Marking, Waterborne
This specification covers three types of low VOC (volatile organic compounds), ready-mixed, one-component, 100% acrylic waterborne airfield and traffic marking paint. The paint is suitable for application on such traffic-bearing surfaces as Portland cement concrete, bituminous cement concrete, asphalt, tar, and previously painted areas of these surfaces. The paint may be used either alone or to bind reflective beads.
-
TT-P-24 Paint, Oil (Exterior Concrete and Masonry)
This specification covers an oil paint in eggshell gloss for exterior concrete and masonry in two types.
-
TT-P-26 Paint, Interior, White, Tints and Black, Fire Retardant
This specification covers a flat fire retardant paint for interior use. This specification is canceled. Superseded by A-A-3058.
-
TT-P-28 Paint, Aluminum, Heat Resisting
This specification covers aluminum pigmented, heat resisting paint that will withstand solvents and elevated temperatures.
-
TT-P-2846 Paint, Latex (Recycled with Post-Consumer Waste)
This specification covers latex emulsion paint containing a minimum of 50 percent post-consumer waste.
-
TT-P-29 Paint, Latex
This specification covers a ready-mixed, latex-base paint for interior walls and ceilings. This specification provides two types of flat paint. This specification is canceled. Superseded by A-A-2246.
-
TT-P-30 Paint, Alkyd, Odorless, Interior, Flat, White And Tints
This specification covers two types of ready-mixed odorless, alkyd, interior, flat paint used as a decorative and protective coating on interior walls and ceilings. This specification is canceled. Superseded by TT-P-29.
-
TT-P-31 Paint, Oil, Iron-Oxide, Ready-Mixed, Red And Brown
This specification covers ready-mixed, red and brown, iron-oxide paint. This specification is canceled. Superseded by SSPC-PAINT25.
-
TT-P-32 Blackboard Coating
This specification covers a low sheen paint suitable as a chalk board coating used to restore writing surfaces.
-
TT-P-38 Paint, Aluminum, Ready-Mixed
The Material covered by this specification is a ready-mixed aluminum paint suitable for use on exterior and interior surfaces exposed to atmospheric salt and brine conditions.
-
TT-P-47 Paint, Oil (Nonpenetrating – Flat, Ready-Mixed Tints And White)
This specification covers nonpenetrating, flat, ready-mixed oil paint for interior ceilings and walls. This specification is canceled. Superseded by A-A-2246.
-
TT-P-52 Paint, Oil – Alkyd-Oil Wood Shakes And Rough Siding
This specification covers a relatively thin body paint for use on wood shakes, also suitable for painting rough siding and similar surfaces. This specification is canceled. Superseded by TT-P-102.
-
TT-P-55 Paint, Polyvinyl Acetate Emulsion, Exterior
This specification covers polyvinyl acetate emulsion paints for application to exterior masonry surfaces. This specification is canceled. Superseded by TT-P-19 & TT-P-96.
-
TT-P-59 Paint, Ready Mixed, International Orange (Not For Residential Use)
This specification covers one type of ready-mixed exterior paint of international orange color utilizing molybdate orange agent and suitable for use as a finish coat on wood and metal.
-
TT-P-61 Paint, Exterior, Black, Ready-Mixed
This specification is canceled. Superseded by TT-E-489.
-
TT-P-71 Paint, Exterior, Green, Ready Mixed
This specification is canceled. Superseded by TT-E-489.
-
TT-P-81 Paint, Oil, Alkyd, Ready Mixed Exterior, Medium Shades
This specification covers a range of medium-shade, ready-mixed oil alkyd paints made from a white base. This specification is canceled. Superseded by TT-P-102.
-
TT-P-85 Paint, Traffic and Airfield Marking, Solvent Base
This specification is canceled. Superceded by TT-P-1952 or A-A-2886.
-
TT-P-86 Paint, Red-Lead Base, Ready-Mixed
-
TT-P-87 Paint, Traffic, Premixed Reflectorized
This specification is canceled. Superceded by TT-P-1952 or AA-2886.
-
TT-P-91 Paint, Rubber Base, For Interior Use (Concrete and Masonry Floors)
This specification is canceled. Superceded by A-A-3121.
-
TT-P-92 Paint, Obliterating (In pressurized dispensers)
This specification is canceled. Superceded by TT-C-2114
-
TT-P-95 Paint, Rubber, For use on swimming pools and other masonry surfaces
This specification is canceled. Superceded by A-A-3120