Showing 1–48 of 54 results

• 

  A-A-2787 Enamel, (Aerosol (Low VOC)

  This description covers two types of aerosol enamels meeting National Volatile Organic Compound Emission Standards for Aerosol coatings, 40 CFR 59, Subpart E. The aerosol enamel shall be furnished in nominal 475 mL (1-pint) commercial pressurized dispensers with cover caps protecting the valves. The enamel shall be dispersible by hand shaking for 1 minute at room temperature. The valve shall operate with moderate finger pressure and close immediately upon release of pressure without sputtering. The spray shall be uniform and a smooth film shall be deposited. The can shall deliver a minimum of 98.0 percent by weight of contents.

  ---

• 

  A-A-2962 Enamel, Alkyd, Exterior, Solvent Based, Low VOC

  This description covers three gloss levels of lead and chromate free alkyd enamel for industrial maintenance coating on a wide range of metallic and non-metallic surfaces. Apply surfaces that have been previously primed. Two coats are recommended for durable outdoor and indoor service. The paint shall meet current Air Pollution Regulations of the Southern California Air Quality Management District, Rule 1113, Industrial Maintenance Coatings.

  ---

• 

  A-A-50574 Enamel, Odorless, ALKYD, Interior, Semigloss, White and Tints

  This commercial item description (CID) covers odorless, alkyd, interior semigloss enamel, non-lead, in whites and tints.

  ---

• 

  A-A-665 Enamel, Fast-Dry Aerosol

  The A-A-665 covers fast drying enamel paints for general-purpose use. This specification is canceled. Superseded by A-A-2787.

  ---

• 

  AMS-3120 Enamel, Glyceryl Phthalate, Black Baking

  ---

• 

  AMS-3125 Enamel, Glyceryl Phthalate, Engine Gray Baking

  ---

• 

  MIL-DTL-15090 Enamel, Equipment, Light Gray (Navy Formula No111)

  This specification covers a 250-gram per liter (maximum) (2.08 pounds per gallon [maximum]) volatile organic content (VOC) complying paint. The paint is a light gray equipment enamel paint (Navy Formula Number 111) for shipboard use as a topcoat on equipment, machinery, furniture, and electrical equipment, such as switchboard installations. The MIL-DTL-15090 may be used wherever VOC air pollution regulations apply. The light gray equipment enamel paint covered by this specification is an air dry, solvent base coating for use in all interior dry areas including applications covered by reactor plant painting schedules. This product is supplied in a single can and used as supplied without thinning.

  ---

• 

  MIL-DTL-24607 Enamel, Interior, Nonflaming (Dry), Chlorinated Alkyd Resin, Semigloss

  This specification covers a semigloss, chlorinated alkyd resin, interior enamel that does not support combustion or flaming when dry, and is for use on primed, smooth metal, glass reinforced plastic (GRP), wood and plastic/composite surfaces.

  ---

• 

  MIL-DTL-700 Enamel, Deck, Interior, Gray (Formula No. 20L)

  This specification covers a 340 grams per liter (g/L) (maximum) [2.8 pounds per gallon (lb/gal) (maximum)] volatile organic content (VOC) gray, interior deck enamel (Formula No. 20L) for shipboard use as a general purpose interior deck enamel for application to either primed steel or aluminum. Product is supplied in a single can and used as supplied. This specification is canceled. Superseded by MIL-DTL-15090.

  ---

• 

  MIL-E-15129 Enamel, Ship, Exterior, Alkyd, Navy Gray No 7 (Formula No 5N)

  This specification is canceled. See TT-E-490.

  ---

• 

  MIL-E-15130 Enamel, Ship, Exterior, Alkyd, Haze Gray, No 27, Formula No 5H

  This specification is canceled. Use TT-E-490.

  ---

• 

  MIL-E-15145 Enamel, Zinc Dust Pigmented, Fresh Water Tank Protective, Formula No 102

  This specification is canceled with no superseded document.

  ---

• 

  MIL-E-15936 Enamel, Exterior, Gray, No 27 – Vinyl Alkyd (Formula No 122-27)

  This specification is canceled. See TT-E-490.

  ---

• 

  MIL-E-16663 Enamel, Semi-Gloss (for Metal Surfaces of Ammunition and Ammunition Containers)

  This specification covers semi-gloss enamels for production line application by brushing, spraying or dipping.

  ---

• 

  MIL-E-16738 Enamel, Exterior, White, Vinyl Alkyd (Formula No 122-82)

  This specification is canceled. See TT-E-490.

  ---

• 

  MIL-E-19603 Enamel, Baking, for Roller Coat Application

  This specification covers two classes of enamel for roller application over a size coat on metal containers.

  ---

• 

  MIL-E-20090 Enamel, Alkyd, Striping, Brown (Formula No 41)

  This specification covers enamel, alkyd, stripping, brown, Formula No. 41, for use as a marking paint with good brushing characteristics.

  ---

• 

  MIL-E-2052 Enamel, Textured, Olive Green (For Coating Liners, Helmet M-1)

  This specification covers enamel, textured, olive green (for coating liners, helmet M-1). This specification is canceled. Superseded by MIL-C-43460.

  ---

• 

  MIL-E-22118 Enamel, Electrical-Insulating

  This specification covers one type and grade of synthetic insulating enamel for use on electrical equipment, and for general purpose use. This specification meets Air Pollution Regulations (Rule 66).

  ---

• 

  MIL-E-46061 Enamel, Camouflage, Solar And Heat Reflecting

  This specification is canceled. Use MIL-E-52798, MIL-L-52909 or MIL-E-46096.

  ---

• 

  MIL-E-46096 Enamel, Lustreless, Quick Drying, Styrenated Alkyd Type, Solar Heat Reflecting

  This specification covers two types of quick drying lustreless enamel used as a finishing coat to minimize heat build up in the interior of Army weapons systems. It also provides for one composition which is suitable for use under AIR POLLUTION REGULATIONS. This specification is canceled. Superseded by MIL-C-46168 or MIL-DTL-53039.

  ---

• 

  MIL-E-46117 Enamel, Alkyd, Lustreless, Solar Heat Reflecting, Olive Drab

  This specification is canceled. Superseded by MIL-E-46096.

  ---

• 

  MIL-E-46136 Enamel, Semi-Gloss, Alkyd, Solar Heat Reflecting, Olive Drab

  This specification is canceled. Superseded by MIL-E-46096.

  ---

• 

  MIL-E-52227 Enamel, Semigloss, Quick Drying

  This specification is canceled. Superseded by MIL-L-52043 or TT-E-529.

  ---

• 

  MIL-E-52798 Enamel, Alkyd, Camouflage

  This specification covers a camouflage alkyd enamel used as a finishing coat on military equipment and is suitable for use under air pollution regulations. This specification is canceled. Superseded by MIL-C-46168 or MIL-DTL-53039.

  ---

• 

  MIL-E-52835 Enamel, Modified Alkyd, Camouflage, Lusterless

  This specification covers a modified alkyd lusterless camouflage baking enamel for use as a finish coat on military equipment. It can be used in areas covered by air pollution regulations. This specification is canceled. Superseded by MIL-C-46168 or MIL-DTL-53039.

  ---

• 

  MIL-E-52891 Enamel, Lusterless, Zinc Phosphate, Styrenated Alkyd Type

  This specification covers zinc phosphate type of quick-drying synthetic lusterless enamel used as a finishing coat on ammunition and other metal surfaces. It complies with South Coast Air Quality Management District Rule 442.

  ---

• 

  MIL-E-52929 Enamel, Alkyd, Camouflage, Flash Dry

  This specification covers a flash dry camouflage alkyd enamel used as a finishing coat on military equipment and is suitable for use under air pollution regulations. This specification is canceled. Superseded by MIL-C-46168 or MIL-DTL53039.

  ---

• 

  MIL-E-5556 Enamel, Camouflage, Quick Drying

  ---

• 

  MIL-E-5557 Enamel, Heat-Resisting, Glyceryl-Phthalate, Black

  This specification is canceled. Use TT-E-489.

  ---

• 

  MIL-E-5558 Enamel, Wrinkle-Finish, For Aircraft Use

  ---

• 

  MIL-E-74 Enamel, Lustreless, Quick Drying

  This specification is canceled. Superseded by FED SPEC TT-E-515.

  ---

• 

  MIL-E-7729 Enamel, Gloss

  This specification is canceled. Use TT-E-489.

  ---

• 

  MIL-PRF-24763 Enamel, Emulsion Type, for Shipboard use

  This specification covers the requirements of (95 percent acrylic) water based emulsion (latex), enamels primarily for use on primed metal surfaces. The enamel is volatile organic content (VOC) compliant and may be supplied in a variety of colors for shipboard use.

  ---

• 

  TT-E-1384 Enamel, Gloss, Synthetic (For Metal Equipment)

  This specification covers two classes of fast drying enamel suitable primarily for application to metal equipment. This specification is canceled. Superseded by TT-E-2784 and A-A-2787.

  ---

• 

  TT-E-1593 Enamel, Silicone Alkyd Copolymer, Gloss (For Exterior and Interior Use)

  This specification covers a copolymerized silicone alkyd enamel for use on primed metal.

  ---

• 

  TT-E-1793 Enamel, Semi-Gloss, For Metal and Wood Furniture

  This specification covers a synthetic semi-gloss enamel for metal and wood furniture that may be applied by brushing, spraying or dipping. It can be used in areas covered by AIR POLLUTION REGULATIONS. This specification is canceled. Superseded by TT-E-2784 and A-A-2787.

  ---

• 

  TT-E-2124 Enamel (Vinyl-Alkyd, Exterior)

  ---

• 

  TT-E-2784 Enamel (Acrylic-Emulsion, Exterior)

  This specification covers a lead mercury and hexavalent chromate free acrylic emulsion enamel in the following type for exterior use on primed metal, concrete, masonry, and properly prepared wood. This specification is canceled. Superseded by A-A-3183.

  ---

• 

  TT-E-485 Enamel, Semigloss, Rust-Inhibiting

  This specification covers four types of semigloss rust-inhibiting enamel for use on metal as a one or two coat primer or finishing system.

  ---

• 

  TT-E-487 Enamel, Floor And Deck

  This specification covers an enamel formulated for use on wood and concrete floors and decks.

  ---

• 

  TT-E-488 Enamel – In Pressurized Dispensers

  This specification covers an enamel for general-purpose interior and exterior application. This specification is canceled. Superseded by A-A-665.

  ---

• 

  TT-E-489 Enamel, Alkyd, Gloss, Low Voc Content

  This specification covers one type of an air drying, high gloss, alkyd enamel for use on primed exterior and interior metal and wood surfaces.

  ---

• 

  TT-E-490 Enamel, Silicone Alkyd Copolymer, Semigloss (for Exterior and Interior Use)

  This specification covers a copolymerized silicone alkyd enamel for use on primed, smooth metal surfaces. This specification is canceled. Superseded by MIL-PRF-24635.

  ---

• 

  TT-E-491 Enamel, Gloss, Synthetic (For Metal And Wood Furniture)

  This specification covers a synthetic, gloss enamel for metal and wood furniture, to be applied by brushing, spraying, or dipping. This specification is canceled. Superseded by TT-E-2784.

  ---

• 

  TT-E-496 Enamel, Heat-Resisting (400 Deg F), Black

  This specification covers a heat resisting black enamel. This specification is canceled. Superseded by A-A-3054.

  ---

• 

  TT-E-506 Enamel, Alkyd, Gloss, Tints and White (for Interior Use)

  This specification covers two types of an alkyd-type, full-gloss enamel suitable for interior use on walls, ceilings, and wood-work.

  ---

• 

  TT-E-508 Enamel, Interior Semigloss, Tints And Whites

  This specification covers two types of ready-mixed high-grade synthetic semigloss enamel, in white and tints, suitable for general interior use on walls, ceilings, and woodwork. This specification is canceled. Superseded by A-A-50574.

  ---