TT-E-489 Enamel, Alkyd, Gloss, Low Voc Content

This specification covers one type of an air drying, high gloss, alkyd enamel for use on primed exterior and interior metal and wood surfaces.

SKU: 489 Category:

Product Description

A high grade, single component, air dry, high gloss alkyd enamel formulated for interior and exterior primed metal and wood surfaces.

Click On The Links Below To View Documents:

Technical Data Sheet (TDS) – TT-E-489

Surface Preparation:

Surface must be clean, dry and free of all contamination before application. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. Wood surfaces must be sanded and primed before application of enamel.

Application & Reduction:

TT-E-489J Enamels can be applied by conventional or airless spray application. For spraying, thin up to 10% or as needed with Xylene. For brushing, use as is or with minimum thinning. No catalyst is required, single component coating that will air dry.