Mil-Spec
Showing 97–108 of 461 resultsSorted by popularity
-
The MIL-PRF-907 anti-seize thread compound can be used on threads of steel, nuts, studs, bolts and other mating surfaces, including those of superheated steam installations, at high temperatures up to 1050 degrees Fahrenheit (degrees F) (566 degrees Celsius (degrees C)).
-
This O-E-760 specification covers five types of ethyl alcohol (ethanol). This specification is canceled. Superseded by A-A-59282, A-A-51693, A-A-53880.
-
This DOD-P-15328 specification covers pretreatment wash primer for use on clean metal surfaces of all types as a treatment pior to application of the coating system. The purpose of the material is to increase the adhesion of the coating system. The wash primer is not intended to be used as a permanent protective coating in itself. The materials covered by this specification is suitabie for use where air pollution regulations apply for solvents in paints.
-
This MIL-C-38334 specification covers phosphoric-acid base nonflammable compounds for aluminum corrosion removal from aircraft surfaces.
-
The MIL-L-19538 specification covers the requirements for acrylic-nitrocellulose camouflage lacquer for metal surfaces which is particularly formulated for resistance to diester lubricating oil. This specification is canceled. Superseded by MIL-L-81352.
-
This MIL-PRF-81352 specification covers general touch-up coatings for use on aircraft and support equipment. The volatile organic compound (VOC) content of these coatings is less than 340 grams/liter (g/l) (2.837 lbs/gal).
-
This MIL-DTL-24607 specification covers a semigloss, chlorinated alkyd resin, interior enamel that does not support combustion or flaming when dry, and is for use on primed, smooth metal, glass reinforced plastic (GRP), wood and plastic/composite surfaces.
-
This TT-E-527 specification covers one type of an air drying, lusterless, alkyd enamel for use on pried exterior and interior metal and wood surfaces. The enamel paint is lead and chromate free and meets air pollution requirements for solvent emissions.
-
This TT-E-488 specification covers an enamel for general-purpose interior and exterior application. This specification is canceled. Superseded by A-A-2787 Aerosol Enamel.
-
This MIL-PRF-83483 specification presents requirements for one type of antiseize thread compound composed of molybdenum disulfide and petrolatum.
-
This commercial item description (CID) covers two blends of mixed cleaning compound solvent for use in final cleaning of chemically treated aluminum alloy surfaces and solvent-resistant coatings prior to application of chemical treatments or integral fuel tank sealants.
-
This MIL-DTL- 24441 specification covers a series of two component epoxy-polyamide paints designed to protect surfaces from environmental attack.