This MIL-C-6529 specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.
This MIL-C-8514 specification covers one type and grade of pretreatment coating for use on clean metal surface of all types as a treatment prior to application of the coating system. The smooth finish spray-type coating may also be applied by brushing, roller coating, or swabbing.
This MIL-C-87936 specification covers two types of concentrated cleaning compounds for removal of soils from aircraft surfaces. Requirements listed in this specification apply to both types unless otherwise noted.
This MIL-D-16791 specification covers both water-soluble and oil-soluble nonionic detergents for use in preparing cleaning solutions which are effective in, and rinsable with, either fresh or sea water.
This MIL-DTL-11414 specification covers the requirements of a corrosion inhibiting, low VOC content, fast-dry alkyd primer for coating interior and exterior surfaces of ammunition. This enamel primer is formulated free of lead and chromate (hexavalent chromium), with a maximum VOC content of 420 grams/liter (g/l) (3.5 pounds/gallon (lbs/gal)) as applied. The primer is also formulated free of hazardous air pollutants (HAP-free). This ammunition primer is not to be used on tactical or combat equipment. Equipment primed with this material is not to be coated with chemical agent resistant coating (CARC) primers or topcoats.
This MIL-DTL-12276 baking varnish covers three types of heat hardening phenolic varnishes suitable for use as a coating for cartridge cases and as a lining for munitions and other containers. This document also provides for an additional composition suitable for use under Air Pollution regulations.