MIL-V-16399A Ty. B coating is a moisture and fungus resistant varnish for the treatment of communications, electronic and related equipment. May also be used on tools and materials that are to be transported by ship. Dries to a smooth, hard film that resists cracking and splintering.
Note: please refer to the appropriate technical performance specification, MIL-V-16399, and applicable technical documents under the MSDS/Documents Tab.
The varnish shall be of either of the two following types:
Type. The types of coatings are as follows:
Type A – Without naphthenate driers
Type B – With naphthenate driers
Surface must be clean, dry and properly prepared before application. May be applied by brush, roll or spray.
AEROSOL CANS: Vigorously shake can for one minute to to thoroughly mix coating. Shake can occasionally while spraying. Hold can approximately 12″ from surface to be painted.