MIL-PRF-16173 Grades 1, 2, 3, 4, and 5. This performance specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.
Corrosion preventive compounds covered by this specification are furnished in the following classes and grades.
Classes : The classes of the MIL-PRF-16173 corrosion preventive compounds are designated by Class I (High volatile organic compounds (VOC)) or Class II (Low VOC) as follows:
Class I – High Voc – VOC exceeding 2.8 pounds per gallon (lbs/gal) (340 grams/liter).
Class II – Low Voc – VOC not exceeding 2.8 lbs/gal (340 grams/liter).
Grades : The grades of the MIL-PRF-16173 corrosion preventive compound are the following:
Grade 1 – Hard film (175 degrees Fahrenheit (deg F) 80 degrees Celsius (deg C) minimum flow point of solvent deposited film)
Grade 2 – Soft film
Grade 3 – Water displacing, soft film
Grade 4 – Transparent, non-tacky film
Grade 5 – Low pressure steam removable film
Please refer to the Technical Specs Tab for further Nox-Rust information, or contact us at 888-697-6001 or email@example.com, thank you.
Nox-Rust 501 LS / MIL-PRF-16173 Class I Grade 1
NOX-RUST 501-LS is a solvent type, cold application rust preventive hard film which meets the requirements of MIL-PRF-16173E, Grade I, Class I. NOX-RUST 501-LS is for the protection of metals when exposed to outdoor weather conditions and for general purpose preservation, indoor or outdoor, with or without cover, for domestic and overseas shipment where a “dry to touch” film is required.
Nox-Rust 502 DLS / MIL-PRF-16173 Class I Grade 2
NOX-RUST 502 DLS is a petroleum based, solvent type, cold applied rust preventive formulated to fulfill the requirements of MIL-PRF-16173E Grade #2 Class I Specification. NOX-RUST 502 DLS deposits a grease like film which gives versatility in application. It is recommended for extended undercover protection of internal or external surfaces of machinery and/or materials with or without use of supplementary barrier materials. It is also applicable for outdoor protection for limited periods, where metal temperatures do not reach levels which produce prohibitive flow of the corrosion preventive film. NOX-RUST 502 DLS is completely miscible with lubricating oils which would eliminate the necessity of coating removal, in some applications.
Nox-Rust 503 DLS / MIL-PRF-16173 Class I Grade 3
NOX-RUST 503 DLS is for use where water or saline solution must be displaced from corrodible surfaces and the corrosion prevented or arrested. For protection of interior surfaces of machinery, instruments or material under cover for limited periods. For protection of critical bare steel or phosphated surfaces for extended periods when packaged with satisfactory barrier materials. Nox-Rust 503 DLS is a solvent type, cold application, rust preventive, low voc soft film that meets Specification Mil-PRF-16173E, Grade 3, Class I.
Nox-Rust 110 DLS / MIL-PRF-16173 Class I Grade 4
NOX-RUST 110 DLS is a wax-based, solvent type, cold applied, corrosion preventative designed for use on ferrous and non-ferrous metals when exposed to indoor or outdoor storage conditions. NOX-RUST 110 DLS deposits a transparent, firm, wax-like film that is readily removable by conventionally used solvents or degreasing methods. NOX-RUST 110 DLS is formulated to fulfill the requirements of MIL-C-16173E, Class I, Grade #4 Specification.