TT-P-664 Primer Coating, Alkyd, Corrosion-Inhibiting, Lead And Chromate Free, Voc-Compliant

This specification covers the requirements for a quick drying, corrosion-inhibiting, high solids alkyd primer for pretreated ferrous and non-ferrous metals. The primer is lead and chromate free and contains no more than 420 grams per liter (3.5 pounds per gallon) of volatile organic compounds (VOC) applied.

SKU: 664 Category:

Product Description

A highly rust-resistant primer for ferrous metal. TT-P-664D Red Oxide Metal Primer is lead free, Low VOC, and has an extremely high solids content. This alkyd primer offers excellent “wetting” of the steel in addition to superior abrasion and weather resistance. May be applied over firm old alkyd or oil-based coatings as a barrier coat. This coating is extremely versatile due to its rich formulation.

Click On The Links Below To View Documents:

Technical Data Sheet (TDS) – TT-P-664
Material Safety Data Sheet (MSDS) – TT-P-664

Also Known As:

» TT-P-664
» QPL-TT-P-664


Surface must be clean, dry and free of all contamination before application of primer.
STEEL:  Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.



Chemsol’s TT-P-664D Red Oxide Alkyd Primer can be applied by brush, roll, or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% by volume or as needed with Acetone, Xylene or Synthetic Reducer.

Red Oxide