MIL-P-6884 Paint, Camouflage Or Temporary Identification, Solvent Removable


This specification covers the requirements for a temporary paint for camouflage or identification purposes, capable of being removed after an extended weathering period with aliphatic solvents.

SKU: 6884 Category:

Product Description

An air dry, solvent removable, temporary paint. This enamel is low “VOC’ as well as lead and chromate free.

Click On The Links Below To View Documents:

Technical Data Sheet (TDS)- MIL-P-6884C


Surface must be clean, dry and free of all contamination before application. Prime and apply topcoat per specification instructions. If used on previously painted surfaces, coating must be reduced and tested on a small area for compatibility with the existing coating.
STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.

Galvanized or other metals: Clean and remove oxidation contamination on surface, followed by treatment with DOD-P-15328D wash primer, E90G4, or chemical pretreat with zinc phosphate. Due to the variability in these surfaces, testing adhesion on each situation is recommended.



MIL-P-6884C Enamels can be applied by conventional or airless spray application. For spraying, thin up to 10% or as needed with Xylene. For brushing, use as is or with minimum thinning with TT-T-306C Type I Reducer.