Paints and Coatings
Showing 13–24 of 258 results
-
The commercial item description covers three types of mineral spirits (volatile petroleum spirits) for use as solvent, cleaners, or thinners with coatings such as paints, primers, natural or synthetic enamels, and their vehicle component. This regular and odor free mineral spirits specification is canceled. Superseded by MIL-PRF-680.
-
This A-A-2962 description covers three gloss levels of lead and chromate free alkyd enamel for industrial maintenance coating on a wide range of metallic and non-metallic surfaces. Apply this solvent based enamel to surfaces that have been previously primed. Two coats are recommended for durable outdoor and indoor service. The paint shall meet current Air Pollution Regulations of the Southern California Air Quality Management District, Rule 1113, Industrial Maintenance Coatings.
-
This commercial item description covers two types of interior wall and wood trim primer. Both types are lead free, low VOC, and can be top coated with alkyd or latex paints. These coatings are intended for uncoated interior surfaces such as wood trim, sheet rock, particle board, and masonry.
-
This A-A-3003 description covers two types and classes of low vac, spray applied, clear and pigmented lacquer intended for interior use on properly prepared metal and plastic surfaces, and sealed wood surfaces.
-
This A-A-3007 commercial item description covers paint thinners intended for reducing the viscosity of styrenated alkyd enamels and medium and long oil alkyd enamels. The thinner is also intended for reducing phenol-formaldehyde spar varnishes.
-
This commercial item description describes a one component, heat resisting paint for metal. This paint is for use over metal, primarily steel, and can withstand continuous operating temperatures of 204 Deg. C (400 Deg. F).
-
This commercial item description describes an interior, waterborne, Uniform Building Code (UBC) Class 1, fire retardant paint. This paint can be applied by brush, spray, or roller.
-
This A-A-3121 commercial item description (CID) describes a ready-mixed, synthetic rubber-base paint coating for interior concrete and masonry floors.
-
This commercial item description describes a one component, ready-mixed, penetrating primer for use on previously painted chalked porous substrates. The primer provides good intercoat adhesion between the chalked substrate and topcoat.
-
This A-A-3164 description covers a lusterless (flat) and semigloss synthetic resin lacquer for application onto lacquer resistant primer or recoating prepared metal surfaces. Not for use on bare metal without a primer undercoat. Provides a rapid tack free and dry hard condition at temperatures lower than curing type resins.
-
This description covers a durable, pigmented, high gloss lacquer for spray or hand application on primed or prepared surfaces.
-
This commercial item description covers an acrylic latex paint for exterior use on primed concrete, masonry, stucco, and wood. The exterior acrylic latex paint shall conform to the requirements of prohibited materials.