All Military Specifications
Showing 73–84 of 463 results
-
This DOD-G-24508 specification covers one grade of grease for multi-purpose use and use in grease lubricated ball and roller bearings operating continuously at temperatures up to 149 Deg. Celsius (C) (300 Deg. Fahrenheit (F)) and intermittently up to 177 Deg. C (350 Deg. F) for periods up to 4 hours in any 24-hour period.
-
This DOD-P-15328 specification covers pretreatment wash primer for use on clean metal surfaces of all types as a treatment pior to application of the coating system. The purpose of the material is to increase the adhesion of the coating system. The wash primer is not intended to be used as a permanent protective coating in itself. The materials covered by this specification is suitabie for use where air pollution regulations apply for solvents in paints.
-
This DOD-PRF-85734 specification covers the requirements for one grade of a synthetic base helicopter transmission system lubricating oil.
-
This specification covers two phenolic mixing varnishes for use in mixing with alkyd resin in the preparation of paint. Both phenolic mixing varnishes are 25 gallons in oil length (i.e., for every 100 pounds of resin, 25 gallons of oil are used).
-
An inexpensive method to detect warranty tampering; and vibration loosening. This torque seal inspection lacquer can be used in production on compression fittings, studs, nuts, parts, and assemblies after they are in proper torque or position.
-
F-910 torque seal is an inexpensive method to detect warranty tampering; and vibration loosening. Used in production on compression fittings, studs, nuts, parts, and assemblies after they are in proper torque or position.
-
-
This JAN-C-99 specification covers two types of cement: Type A, Pettman cement; Type B, modified Pettman cement.
-
This specification is canceled. Superseded by MIL-A-48611.
-
This specification covers a liquid resin thermosetting adhesive for bond optical elements for use in military optical instruments.
-
This specification covers three groups of one-part, room-temperature-vulcanizing (RTV), silicone adhesive-sealants which cure to durable, rubber adhesive-sealants upon reaction with moisture in the air. This specification also covers primers for use with the silicone adhesive-sealants.
-
This MIL-A-46146 specification covers three groups of one-part, room temperature-vulcanizing, non-fuel resistant, silicone compounds which cure to durable, rubber sealants and adhesives upon contact with moisture in the air. This specification also covers primers for use with the silicone compounds.