All Military Specifications
Showing 13–24 of 463 results
-
The sealer shall not contain skins or gels and shall be suitable for application by bristle brush or lamb’s wool.
-
This commercial item description covers one type of pigmented exterior alkyd primer coating having a maximum Volatile Organic Compound Content of 250 grams per liter. This primer is intended for use over wood.
-
This commercial item description covers an industrial aerosol air freshener to counteract malodors in occupied indoor areas such as public buildings and aircraft.
-
-
This A-A-2787 description covers two types of aerosol enamel coatings meeting National Volatile Organic Compound Emission Standards for Aerosol coatings, 40 CFR 59, Subpart E. The aerosol enamel shall be furnished in nominal 475 mL (1-pint) commercial pressurized dispensers with cover caps protecting the valves. The enamel shall be dispersible by hand shaking for 1 minute at room temperature. The valve shall operate with moderate finger pressure and close immediately upon release of pressure without sputtering. The spray shall be uniform and a smooth film shall be deposited. The can shall deliver a minimum of 98.0 percent by weight of contents.
-
This description covers a low VOC clear waterborne polymeric coating in three gloss levels for application by brush or spray. The coating is intended for use as a topcoat on interior wood, but is not suitable for use on floors.
-
This Commercial Item Description covers a solvent based traffic paint suitable for application to traffic bearing surfaces such as Portland cement, concrete, bituminous pavement, and plain or vitrified brick surfaces of streets, highways, bridges, tunnels, runways and parking lots.
-
The commercial item description covers three types of mineral spirits (volatile petroleum spirits) for use as solvent, cleaners, or thinners with coatings such as paints, primers, natural or synthetic enamels, and their vehicle component. This regular and odor free mineral spirits specification is canceled. Superseded by MIL-PRF-680.
-
This A-A-2962 description covers three gloss levels of lead and chromate free alkyd enamel for industrial maintenance coating on a wide range of metallic and non-metallic surfaces. Apply this solvent based enamel to surfaces that have been previously primed. Two coats are recommended for durable outdoor and indoor service. The paint shall meet current Air Pollution Regulations of the Southern California Air Quality Management District, Rule 1113, Industrial Maintenance Coatings.
-
This A-A-2985 Commercial Item Description covers a synthetic adhesive suitable for use in bonding silicone rubber to itself and to aluminum without the use of heat and pressure. The silicone rubber to aluminum glue may be either a one-part or a two-part adhesive.
-
This commercial item description covers two types of interior wall and wood trim primer. Both types are lead free, low VOC, and can be top coated with alkyd or latex paints. These coatings are intended for uncoated interior surfaces such as wood trim, sheet rock, particle board, and masonry.
-
This A-A-3003 description covers two types and classes of low vac, spray applied, clear and pigmented lacquer intended for interior use on properly prepared metal and plastic surfaces, and sealed wood surfaces.