A-A-3164 Synthetic Lacquer, Camouflage, Exterior, VOC Complaint

This description covers a lusterless (flat) and semigloss synthetic resin lacquer for application onto lacquer resistant primer or recoating prepared metal surfaces. Not for use on bare metal without a primer undercoat. Provides a rapid tack free and dry hard condition at temperatures lower than curing type resins.

SKU: 3164. Category: .

Product Description

A low VOC, lusterless and semigloss synthetic resin lacquer for application onto a lacquer resistant primer or recoating properly prepared metal surfaces. All colors are lead and chromate free. Not for use on bare metal without a primer undercoat. Provides a rapid, tack free and dry hard condition at temperatures lower than curing type resins.

Click On The Links Below To View Documents:

Technical Data Sheet (TDS)- A-A-3164

SURFACE PREPARATION

Surface must be clean, dry and free of all contamination before application. Substrate must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.

 

APPLICATION & REDUCTION

A-A-3164 should only be applied by spray application due to its fast dry properties. Thin up to one pint per gallon with MIL-T-81772B Type III Thinner, or as needed for proper atomization with spray equipment. Spray one tack coat followed by one full wet coat. The use of MIL-C-8514C and TT-P-1757B Primers, or other recommended lacquer resistant primers, are normally required for use under this lacquer topcoat.

Classifications

Specification

Mil-Spec