A two component epoxy polyamide paint designed to protect surfaces from environmental attack. MIL-DTL- 24441 Topcoat is normally used with #150 primer for maximum resistance to fresh or salt water. The complete three coat Epoxy system is resistant to water, many industrial chemical fumes and high humidity environment conditions. This polyamide epoxy coating is Low VOC as well as lead and chromate free.
Click On The Links Below To View Documents:
Technical Data Sheet (TDS)- MIL-DTL-24441
Also Known As:
Remove all dirt, grease, wax, oil and other contaminants. All mill scale, rust and other interference materials must be completely removed by sandblasting to a minimum SSPC-SP-6 Commercial Grade (NACE NO.3). Prime with MIL-DTL-24441/20 #150 Green Primer.
APPLICATION & REDUCTION
Stir both components thoroughly. Mix the two components together in equal parts, 1:1 BY VOLUME! Allow to stand 1 hour at approximately 70 degrees Fahrenheit before using. Add MIL T-81772B TY.II if necessary to facilitate atomization. Pot life is approximately 2 hours at 90 degrees F, 6 hours at 70 degrees F and 16 hours at 50 degrees F.