Showing all 19 results

• 

  A-A-2850 Coating Compound, Waterborne Polymeric (Interior, Wood)

  This description covers a low VOC clear waterborne polymeric coating in three gloss levels for application by brush or spray. The coating is intended for use as a topcoat on interior wood, but is not suitable for use on floors.
• 

  A-A-59166 Coating Compound, Nonslip (for Walking)

  This commercial slip resistant paint is used for walkways on exterior aircraft surfaces.
• 

  Gear Marking Compound, #10 Yellow
• 

  MIL-C-21067 Coating Compound, Synthetic Rubber, for Exposed Steel Surfaces

  This specification covers synthetic rubber coating compound intended for use in protecting exposed steel surfaces from corrosion.
• 

  MIL-C-81773 Coating, Polyurethane, Aliphatic, Weather Resistant

  This specification is canceled. Use MIL-C-83286.
• 

  MIL-C-83286 Coating, Urethane, Aliphatic Isocyanate, for Aerospace Applications

  This specification is canceled. Superceded by MIL-C-85285, Superceded by MIL-PRF-85285.
• 

  MIL-C-83445 Coating System, Polyurethane, Non-Yellowing, White, Rain Erosion Resistant, Thermally Reflective

  This specification is canceled. Superceded by SAE-AMS-C-83445.
• 

  MIL-DTL-3301 Compound, Asphaltic, Hot-Melt (Cavity Lining)

  MIL-DTL-3301 specification covers a hot-melt asphaltic compound for coating the inner walls of metal cases prior to filling with explosives.
• 

  MIL-DTL-450 Coating Compound, Bituminous Solvent Type, Black – For Ammunition

  MIL-DTL-450 covers an asphalt compound for coating the surfaces of ammunition cavities prior to filling with explosives. It provides for an additional composition of material suitable for use in areas with specific air pollution regulations
• 

  MIL-DTL-46110 Coating Compound, Oxide Black

  This black oxide coating specification covers one grade of a coating compound for use in the blackening ferrous metals to conform to MIL-DTL-13924, class 1 (for wrought iron, plain carbon, and low alloy steels).
• 

  MIL-PRF-22750 Coating, Epoxy, High-Solids

  This specification covers the requirements for a two component, high solids epoxy coating. This coating is free of all inorganic hazardous air pollutants (HAPS), including compounds of lead and chromium. The coating is supplied as a kit.
• 

  MIL-PRF-24635 Coating Systems, Weather-Resistant, Exterior Use

  This specification establishes the performance requirements for weather-resistant coating systems for use on primed, smooth metal, glass reinforced plastic (GRP), wood and plastic/composite exterior surfaces.
• 

  MIL-PRF-3043 Resin Coating, Permanent, For Engine Components and Metal Parts

  This specification covers one type of permanent resin coating for surfaces of engine components and metal parts.
• 

  MIL-PRF-81352 Coatings, Aircraft Touch-Up

  This MIL-PRF-81352 specification covers general touch-up coatings for use on aircraft and support equipment. The volatile organic compound (VOC) content of these coatings is less than 340 grams/liter (g/l) (2.837 lbs/gal).
• 

  TT-C-2114 Coating, Obliterating
• 

  TT-C-492 Coating Compound, Paint Antisweat

  This specification covers a compound applied by brush or spray to provide antisweat protection on surfaces subject to condensation.
• 

  TT-C-498 Coating Compound, Bituminous, Fillers, Solvent Type, Aluminum Pigmented

  This specification covers an aluminum pigmented asphalt coating for use on new roofs an in the repair and coating of asphalt and metal roofing.
• 

  TT-C-520 Coating Compound, Bituminous, Solvent Type, Underbody (For Motor Vehicles)

  This specification covers an asphalt compound suitable for use as a protective coating and sound deadener on the underbody parts of automotive equipment. This specification is canceled. Superseded by MIL-C-62218.
• 

  TT-P-2756 Polyurethane Coating: Self-Priming Topcoat, Low Volatile Organic Compounds (VOC) Content

  This specification covers the requirements for a lead-free, chromate-free, cadmium-free self-priming, polyurethane coating material.