All Military Specifications
Showing 25–36 of 463 results
-
This A-A-3007 commercial item description covers paint thinners intended for reducing the viscosity of styrenated alkyd enamels and medium and long oil alkyd enamels. The thinner is also intended for reducing phenol-formaldehyde spar varnishes.
-
This commercial item description covers two types of epoxy resin based general purpose adhesive. These adhesives are two part systems for use in non-structural bonding of metals, porcelain, ceramic, leather, wood and various porous and non-porous materials to themselves and each other.
-
This commercial item description describes a one component, heat resisting paint for metal. This paint is for use over metal, primarily steel, and can withstand continuous operating temperatures of 204 Deg. C (400 Deg. F).
-
This commercial item description describes an interior, waterborne, Uniform Building Code (UBC) Class 1, fire retardant paint. This paint can be applied by brush, spray, or roller.
-
This commercial item description covers two types of solventless, room-temperature curing, cyanoacrylate A-A-3097 adhesives for use with or without an activator when speed of curing is a primary consideration. It also covers the activator which may be used to provide even faster curing and to enable the adhesives to bond to otherwise applications requiring one-component bonding of small, well-mated surfaces where heat and/or pressure cannot be applied.
-
This A-A-3121 commercial item description (CID) describes a ready-mixed, synthetic rubber-base paint coating for interior concrete and masonry floors.
-
This commercial item description describes a one component, ready-mixed, penetrating primer for use on previously painted chalked porous substrates. The primer provides good intercoat adhesion between the chalked substrate and topcoat.
-
This A-A-3164 description covers a lusterless (flat) and semigloss synthetic resin lacquer for application onto lacquer resistant primer or recoating prepared metal surfaces. Not for use on bare metal without a primer undercoat. Provides a rapid tack free and dry hard condition at temperatures lower than curing type resins.
-
This description covers a durable, pigmented, high gloss lacquer for spray or hand application on primed or prepared surfaces.
-
This commercial item description covers an acrylic latex paint for exterior use on primed concrete, masonry, stucco, and wood. The exterior acrylic latex paint shall conform to the requirements of prohibited materials.
-
-
This description covers a water-clear, high gloss, air-drying lacquer for application by brush, wiping cloth or roller. The lacquer is intended for general interior and exterior maintenance of primed metal or unfinished sealed wood, or for recoating sanded or solvent activated compatibles finishes.