A-A-2962 Enamel, Alkyd, Exterior, Solvent Based, Low VOC

This description covers three gloss levels of lead and chromate free alkyd enamel for industrial maintenance coating on a wide range of metallic and non-metallic surfaces. Apply surfaces that have been previously primed. Two coats are recommended for durable outdoor and indoor service. The paint shall meet current Air Pollution Regulations of the Southern California Air Quality Management District, Rule 1113, Industrial Maintenance Coatings.

SKU: 2962. Category: .

Product Description

An exterior grade, alkyd enamel formulated for low “VOC” content.

Click On The Links Below To View Documents:

Technical Data Sheet (TDS) – A-A-2962A

Surface Preparation:

Surface must be clean, dry and free of all contamination before application. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. Wood surfaces must be sanded and primed before application of enamel.

Application & Reduction:

A-A-2962A Enamels can be applied by conventional or airless spray application. For spraying, thin up to 10% or as needed with Xylene. For brushing, use as is or with minimum thinning. No catalyst is required, single component coating that will air dry.

Fed Std. 595B