MIL-P-15930 Primer Coating, Shipboard, Vinyl-Zinc Chromate (Formula No 120)

This specification covers primer coating, vinyl-zinc chromate, for use with conventional or hot spray equipment over pretreatment coating (Formula No. 117, DOD-P-15328).

SKU: 15930. Category: .

Product Description

A primer coating, vinyl-zinc chromate for use with conventional or hot spray equipment over DOD-P-15328D metal pretreatment wash primer.

Note: please refer to the appropriate technical performance specification, MIL-P-15930, and applicable technical documents under the MSDS/Documents Tab.

Classification/Composition

Primer covered by this specification shall be of the following composition as specified:

Composition G – General use
Composition L – Limited use

The primer shall be composed of the pigments, resin, plasticizer and solvents specified. Small amounts of wetting agents, suspension aids and stabilizers may be used at the discretion of the manufacturer provided all requirements of the specification are met.

Click On The Links Below To View Documents:

Military Performance Specification MIL-P-15930
Technical Data Sheet (TDS)- MIL-P-15930C

APPLICATION & REDUCTION

Surface to be coated must be clean and free of any foreign matter. Pre-treat with DOD-P-15328D by spraying a 0.5 dry mil film coat. Allow to dry for one hour and then coat with a 0.9 – 1.1 dry mil film of MIL-P-15930C. Thin with MIL-T-81772B Type III as needed for proper atomization.

#34096 Green