A-A-59295 Corrosion Preventive Compounds, Cold Application (For New And Fielded Motor Vehicles And Trailers)

This CID covers solvent dispersed corrosion preventive compound referred to herein as “compound” for spray, brush, or dip application on new and fielded motor vehicles and trailers.

SKU: 59295. Category: .

Product Description

NOX-RUST X-128 CLEAR is a thixotropic wax-based rustproofing compound designed to provide a long-term protective film for automotive primed or unprimed steel. This rustproofing compound will dry to a tan colored, wax-like film that will repel water, self-heal, and remain flexible at low temperatures. NOX-RUST X-128 CLEAR will pass all of the requirements of Military Specifications A-A-59295, MIL-C-62218-A and MIL-C-0083933. These specifications are titled Corrosion Preventive Compound for New and Fielded Motor Vehicles and Trailers. NOX-RUST X-128 CLEAR will also pass all the requirements of SAEJ 1804 specification titled Corrosion Preventive Compound, Topside Vehicle Corrosion Protection.

Click On The Links Below To View Documents:

Nox Rust X-121 Aero (A-A-59295 supersedes MIL-PRF-62218B)

Material Safety Data Sheet (MSDS) – A-A-59295


Nox Rust X-128 (A-A-59295 supersedes MIL-PRF-62218A)

Material Safety Data Sheet (MSDS) – MIL-PRF-62218A
Product Information (PI) – Nox Rust X-128, Clear

 

SURFACE PREPARATION

The maximum performance of NOX-RUST X-128 Clear can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50-95°F (10-35°C) at the time of product application.

 

APPLICATION

NOX-RUST X-128 Clear is formulated to be used as supplied. Ensure uniform consistency prior to use. Continued stirring is generally not required. If the product thickens due to cold storage or loss of solvent during use, contact Daubert Chemical Company. DO NOT THIN NOX-RUST X-128 Clear. Incorrect thinning will affect film build, dry time and product performance. Daubert Chemical Company recommends that the ambient and product temperature be 50 – 95 F (10 – 35 C) at time of application. NOX-RUST X-128 Clear can be spray or dip applied.

Classifications

Specification

Mil-Spec